User System Mode; Outline Of System Mode For Users - Toshiba B-FP2D Series Key Operation Specification

9 USER SYSTEM MODE

9.1

OUTLINE OF SYSTEM MODE FOR USERS

When the printer status is paused, the user's system mode is entered when the following operations are executed.
・
Hold down the [PAUSE] key for 3 seconds or longer.
The system mode is intended for performing parameter setting, and other settings.
When a language other than Japanese is selected in the language setting (7.4.4 LCD language setting), the
language displayed on the panel is English.
The key operations for the system mode are described below.
Key operations follow Section 6.1 LIST BOX WITH SCROLLBAR.
System Mode for users top image
Top menu
1.Reset
2.Mode Setting
3.Set PARAM
4.Adjust Set
5.Dump Mode
6.Expand Mode
7.I/F Setting
8.BASIC Setup
1.Reset
2.Mode Setting
3.Set PARAM
4.Adjust Set
5.Dump Mode
6.Expand Mode
7.I/F Setting
8.BASIC Setup
Used to reset the printer.
Same as 7.3 Mode Setting of the system mode.
Same as 7.4 Set PARAM of the system mode.
Same as 7.5 Adjust Set of the system mode.
Used to print the data sent from the host
The printer switches the mode to execute the BASIC program.
Same as 7.9 Interface setting of the system mode.
Used to set the function of the BASIC program when it is loaded
printer.
-115-