System Fan - HP xw9300 Service And Technical Reference Manual

System Fan

To remove the system fan:
1. Disconnect power from the system
memory duct
2. Disconnect the fan plug
3. Press in on the ribbed portion of the fan housing
the chassis.
To replace the system fan, reverse the previous steps.
CAUTION: When replacing the system fan, be sure that the fan is situated so that the airflow direction
arrow is pointing toward the back of the chassis. To see the airflow direction arrow, you must remove the
fan from the fan holder.
(page
(page 92).
1
from the system board.
79), remove the access panel
2 , rotate the fan housing down
Removal and Replacement of Components
(page 86), and remove the
3 , and lift it out of
93