Memory; Memory Module Features; Memory Module Requirements - HP xw9300 Service And Technical Reference Manual

Memory

Memory Module Features

• Contains 8 memory slots for DIMMS
• Supports 512MB, 1GB, and 2GB pairs
• Supports 1GB minimum configuration (2 x 512 DIMM)
• Supports 16GB maximum configuration (8GB maximum on Windows and 16GB maximum on Linux)
Supports dual-channel DIMMs
•

Memory Module Requirements

• Use only industry-standard, registered, PC-3200 DIMMs
• Match DIMM pairs by size and type
• No support for unbuffered memory
To remove a memory module:
1. Disconnect power from the system
memory duct
CAUTION: To ensure that memory modules are not damaged during removal or installation, power off
the workstation and unplug the power cord from the AC power outlet. Wait until the LED on the back of
the power supply turns off before removing memory. If you do not unplug the power cord while installing
memory, your memory modules might be damaged and the system will not recognize the memory
changes.
2. Gently push outwards on the socket levers
Lift the DIMM
3.
94 Removal and Replacement Procedures
(page
(page 92).
2 straight up and remove it from the unit.
79), remove the access panel
1 .
(page 86), and remove the