System Fan; Removing The System Fan - HP x4000 Technical Reference Manual

Installing or Replacing Parts and Accessories

System Fan

System Fan

Removing the System Fan

1. Turn off the display and shut down the Workstation. Disconnect all
2. Remove the Workstation's cover (refer to page 145 for instructions).
3. Holding the fan with one hand, use a screwdriver to gently push the
Figure 10-28 Removing the Fan
4. Disconnect the fan connector from the system board.
190
This manual downloaded from http://www.manualowl.com
power cables and any LAN or telecommunications cables.
retaining clips in, then slide the fan up and out of the chassis.
3
3
4
Chapter 10