Hp xw series workstations - quick reference card (arabic version) (2 pages)
Summary of Contents for HP Xw9300 - Workstation - 1 GB RAM
Page 1
Setting Up SATA RAID on the HP xw9300 Mini-White Paper Introduction............................2 Steps..............................2 Install Drives ............................ 2 Enable RAID ............................ 2 Configure the RAID Volume ....................... 2 Tab to Free Disks ..........................3 Set the Boot Order ........................... 3 Rebuild the OS on the new RAID Volume ....................
Introduction This document details the steps needed to setup RAID 0, RAID 1, RAID 10, and JBOD disk configurations on an HP xw9300 Workstation. Additional information on these RAID modes can be found in the Workstation RAID Primer mini-white paper which can be found by visiting and selecting the White papers quick jump link.
10. Tab to the Stripping Block to select the size (4K, 8K, 16K, 32K, 64K, 128K, Optimal). The default is Optimal. 11. Use the up and down arrow keys to set the block size. Sscreen 2 nVidia RAID Utility Tab to Free Disks 12.