HP xw9300 Service And Technical Reference Manual page 49

Table 3-11 Computer Setup Menu Descriptions (continued)
Heading Option Description
Storage Removable Media Boot
Options
Enables/disables ability to boot the system from removable media.
Removal Media Diskette Write
Enables/disables ability to write data to removable media.
BIOS IDE DMA Transfers
Enable/disables the BIOS use of DMA for transfers.
Primary IDE Controller
Enables/disables primary IDE controller.
SATA Controller #0
Enables/disables SATA controller #0.
SATA Controller #1
Enables/disables SATA controller #1.
Boot Order Allows you to configure the boot, diskette drive, and hard drive orders by physically
reordering the menu entries. Each device on the list can be individually excluded from or
included for consideration as a bootable operating system source.
NOTE:
operating system has started.
Shortcut to Temporarily Override Boot Order
To boot one time from a device other than the default device specified in Boot Order,
restart the workstation and press F9 when the F10=Setup message appears on the
screen. After POST is completed, a list of bootable devices is displayed. Use the arrow
keys to select the preferred bootable device and press Enter. The workstation then boots
from the selected non-default device for this one time.
Controller Allows you to specify the order of the attached hard drive controller. The first hard drive
Order controller in the order will have priority in the boot sequence and will be recognized as
drive C (if any devices are attached).
MS-DOS drive lettering assignments might not apply after a non-MS-DOS
Computer Setup (F10) 49