To install a memory module:
CAUTION:
HP only ships DIMMs that are electrically and thermally compatible with this product.
Because third-party DIMMs might not be electrically or thermally compatible, they are not supported
by HP.
NOTE:
DIMMs and their sockets are keyed for proper installation. Be sure these guides line up when
installing a DIMM.
Loading Order for Single Processor Configurations
Use the following image as a guide for installing memory in single processor configurations only. You must
install memory modules in valid configurations:
•
Install the first DIMM pair in socket set
Install the second DIMM pair in socket set
•
Loading Order for Dual Processor Configurations
Use the following image as a guide for installing memory in dual processor configurations only. You must
load memory modules in valid configurations:
•
Install the first DIMM pair in socket set
•
Install the second DIMM pair in socket set
•
Install the next two DIMM pairs in socket sets
1.
Disconnect power from the system
memory duct
(page
92).
2.
Gently push outwards on the socket levers.
1
(blue sockets)
3
(black sockets)
1
(blue sockets)
2
(blue sockets)
3
and
4
(black sockets)
(page
79), remove the access panel
Removal and Replacement of Components
(page
86), and remove the
95