Front Bezel; Bezel Blanks - HP xw9300 Service And Technical Reference Manual

Front Bezel

To remove the front bezel:
1. Disconnect power from the system
2. Lift up on the three tabs
3. Rotate the front bezel away
To replace the front bezel, reverse the previous steps.

Bezel Blanks

To remove the bezel blank:
1. Disconnect power from the system
bezel (page
2. Remove the bezel blank by pushing in on the tabs
To replace the bezel blank, push in on the tabs and push the bezel blank into the bezel.
(page
1 located on the front bezel.
2 from the chassis and remove the bezel.
(page
87).
79) and open the access panel
79), open the access panel
1 and pushing the bezel blank out
Removal and Replacement of Components
(page 86).
(page 86), and remove the front
2 .
87