Pci Or Pci-X - HP xw9300 Service And Technical Reference Manual

PCI or PCI-X

NOTE: The following illustration shows a PCI card being removed from a PCI slot. A PCI-X card is
removed from a PCI-X slot.
To remove a PCI or PCI-X card:
1. Disconnect power from the system
card support
2. Lift the PCI levers
3. Lift the PCI card
4. Install a PCI slot cover and close the PCI levers. If the PCI levers do not close, be sure all cards are
properly seated and then try again.
(page
(page 98), if installed.
1 by first pressing down and then up.
2 out of the chassis. Store the card in an anti-static bag.
79), remove the access panel
Removal and Replacement of Components 101
(page 86) and remove the PCI