Memory
Minimum memory is 32 MB of 60 ns 4 Mbit, or 128 Mbit of 60 ns 16 Mbit DRAMs, or a combination of
both. 32 MB is the minimum required for the HP–UX operating system. Each workstation has 16
memory slots, labeled 0A, 0B through 7A, 7B.
Memory upgrades include:
HP A3026A 32 MB DRAM Upgrade, two 16 MB DRAM boards.
HP A3027A 128 MB DRAM Upgrade, two 64 MB DRAM boards.
Internal Storage Devices
The J Class workstation can have up to two fixed disk drives, and up to two (no two alike) removable
media drives.
Fixed Disk Drives
HP A4117A 1.0 GB LP Fast, Wide 3.5–in disk drive
HP A4119A 2.0 GB LP Fast, Wide 3.5–in disk drive
Removable Media Drives
CD–ROM Drive
HP A4282A CD–ROM Drive
DDS Tape Drive
HP A4281A 4.0–8.0 GB, 4–mm DDS Tape Drive
HP92283A Box of five 60–meter DDS data cassettes
HP92283B Box of five 90–meter DDS data cassettes
HP92283K Package of two cleaning cassettes
Floppy Disk Drive
HP A4283A SCSI Floppy Drive
HP92192X High–Density Micro Flexible Disks (1.44MB Formatted Capacity) – box of ten diskettes
System Graphics
The supported monitors are:
A4032A 17–inch, 1280x1024 color monitor
A4033A 20–inch, 1280x1024 color monitor
The supported graphics boards are:
A4077A 2D color graphics
A4070A HCRX–8 accelerated 2D/3D wireframe, 8/8 bit planes w/8 overlay plane graphics
A4071A HCRX–24 accelerated 2D/3D wireframe, 24 bit planes w/8 overlay plane graphics
A4079A HCRX–8Z accelerated 3D solids, 8/8 bit planes w/8 overlay, PowerShade software
A4179A HCRX–24Z accelerated 3D solids, 24 bit planes, PowerShade software
A4074A CRX–48Z accelerated 2D/3D wireframe, 24/24 bit planes graphics, PowerShade software
A4078A Dual color graphics card
A4253A Freedom series 3150 graphics subsyustem with 1MB texture memory
A4254A Freedom series 3250 graphics subsyustem with 1MB texture memory
A4255A Freedom series 3400 graphics subsyustem with 1MB texture memory
Need help?
Do you have a question about the Visualize J200 and is the answer not in the manual?