General Information; Product Overview - HP Visualize J200 Reference Manual

General Information

Product Overview

Features
Hewlett–Packard's J Class Workstations are based on a PA7200 central processing unit (CPU) that
provides a variety of interfaces, graphics, and mass storage.
Features
Operating system
CPU Performance
PA–RISC PA7200
MIPS:
MFLOPS:
SPECint92:
SPECfp92:
SPECrate_int92:
SPECrate_fp92:
External Cache
Instruction cache size
Organization
Bus width
Instruction cache bus peak
performance
Data cache size
Organization
Bus width
Data cache bus peak
performance
Time source
Memory
Memory Management Unit
Virtual memory address
Instruction TLB and
data TLB
Table 1–1. J Class Features
HP–UX 9.05
100 MHz
196.3
43.9
138.7
221.4
256 KByte / 1 MByte/cpu (J210XC only)
Direct mapped
64 bits
960MB/sec I–fetch (8 byte)
256 KByte / 1 MByte/cpu (J210XC only)
Direct mapped
64 bits
960MB/sec load (8 byte), 960 MB/sec single store (8 byte)
Battery–backed Real–Time Clock
16 slots
32 MB minimum required
Upgradeable to 768 MB at HP–UX 9.05
Upgradeable to 1 GB at HP–UX 10.0
48 bit
Unified 120 page entries, additional single–entry instruction
TLB lookaside, 16 block entries, fully associative
Functionality
HP–UX 10.0 must be used with
multiprocessors
120MHz 120MHZ (J210XC)
237.2
52.7
168.4
266.0
7790.9 (using 2 CPUs)
11745.5 (using 2 CPUs)
1