Operating System - HP Visualize J200 Reference Manual

Figure 1–2. System Unit with Removable Device Door Open
The front bezel can be detached by pushing down on two snapping locks located on top of the bezel and
chassis. By removing this front bezel, you can access the system board, power supply, and peripheral bay.
All these Field Replaceable Units (FRU's) can be detached easily and removed for upgrade or repair.
There are two more FRU's that are accessed from the back of the system: the I/O card and EISA cardcage.
There are two external SCSI connectors available for external devices to be used with this product.

Operating System

HP–UX
HP–UX 9.05 and 10.0 are supported on the Model J200 and J210 workstations. HP–UX is booted from
an internal hard disk drive factory installed with Instant Ignition. HP–UX can also be installed from
external DDS or CD–ROM drives. If the workstation is a client on LAN, HP–UX can be booted over the
LAN. Table 1–7 lists the HP–UX operating systems and languages for the workstation.
HP–UX 10.01 is support on the Model J210XC only.***more info about 10.01 needed?***
Removable Device
Bays (2)