Chap5.doc 111 Thu Jul 25 10:24:29 1996
NOTE:
Retaining Screw
Figure 38
Removing EISA, GSC, and PCI Option Boards
Before removing EISA, GSC, or PCI option boards
from the system unit, remove the Main Tray Assembly
from the system unit.
Slot 1 supports GSC or PCI option boards; slot 2 supports
EISA, GSC, or PCI option boards.
Perform the following steps to remove an EISA, GSC,
or PCI option board:
1 Push in the locking tab and slide the option board support
bracket toward the rear of the main tray to remove it, as
shown in Figure 38.
Removing an EISA, GSC, or PCI Option Board
2 Remove the option board retaining screw, as shown in
Figure 38.
3 Grasp the option board by the edge with both hands and
pull it straight out.
Field Replaceable Units
FRU Removal and Replacement
111