Sdi Output Control; Output Control; Genlock; Figure 6-8 : Webeasy - Sdi Output Control Tab - evertz 570J2K-HW-X19 User Manual

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
6.4.

SDI OUTPUT CONTROL

Figure 6-8 : WebEASY - SDI Output Control Tab
®

6.4.1. Output Control

Loss of Video:
This parameter configures the Decoder Output functionality when input is missing on the
decoder. The applicable options include a continuous black output or freeze on the last valid video frame
received.
Output Timing locked: Reserved for future use.

6.4.2. Genlock

Genlock Reference: This parameter allows the user to specify the input genlock source. The options
include frame reference input 1 or input 2.
Detected Genlock Reference: This will display the detected genlock reference. If no reference is
found, this parameter will reflect unsupported.
Default Genlock Reference: Please set this to NTSC if the expected source frequency is 59.94Hz. If
the expected source frequency is 50Hz please set this to PAL. This allows the internal frame sync to
operate based on input video timing and configures the expected frequency.
Page - 34
Revision 1.0