570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Port Link SFP3 Trap: This control allows the user to enable trap receiving when the port 3 is down
and an associated correction trap when the port is up.
Port Link Status SFP4: This status highlights Data 4 port status. If the port is up, the status will be
inactive / green. If the port is down, the status will be active / red.
Port Link SFP4 Trap: This control allows the user to enable trap receiving when the port 4 is down
and an associated correction trap when the port is up.
5.9.
INPUT NOTIFY
Figure 5-15 : WebEASY
- Input Notify tab
®
5.9.1. Encoder Input Notification
Video Traps: This control allows the user to enable or disable video presence related traps.
Video Faults: This control allows the user to check whether a fault is currently present or not. The fault
in question highlights the presence of a valid video source as green and if input is missing it reflects
red.
Page - 26
Revision 1.0