Temperature Monitor; Card Control; Figure 5-5 : Webeasy - System Tab (Part 3) - evertz 570J2K-HW-X19 User Manual

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Figure 5-5 : WebEASY - System Tab (Part 3)
®

5.1.5. Temperature Monitor

Temperature: This field monitors the current temperature of module.

5.1.6. Card Control

Load Factory Config: This control is used to load factory configuration to each encoder.
Reboot Card: This control allows the user to perform a soft reboot on the encoder.
Page - 15
Revision 1.0