570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Tx Oversized Frame Count: This parameter displays the received Tx oversized frames on this
Ethernet ports.
Clear Status: This button allows the user to reset the Ethernet monitor statistics.
Figure 6-5 : WebEASY
- System Tab (Part 3)
®
6.1.5. Temperature Monitor:
Temperature: This field monitors the current temperature of module.
6.1.6. Card Control
Load Factory Config: This control is used to load factory configuration settings on the unit.
Reboot Card: This control allows the user to perform a soft reboot on the decoder.
Page - 31
Revision 1.0