Tyre Pressure Control (Rdc); Heated Grips - BMW Motorrad R 1250 R Rider's Manual

Table of Contents

Advertisement

tempt is made to steal a wheel
or lift the vehicle for towing, for
example.
When the vehicle is go-
ing to be transported, de-
activate the tilt sensor to pre-
vent the anti-theft alarm (DWA)
from being triggered.
Arming tone
turn indicators flashing, alarm
tone sounds as confirmation of
activation/deactivation of the
DWA.
Arm automatically
matic activation of the alarm
function after the ignition is
switched off.
Customising anti-theft alarm
settings
Switch on the ignition (
Call up the
Settings
Vehicle settings
menu.
system
The following adaptation set-
tings are available:
Adapt
Warning signal
Switch
Tilt sensor
off
Switch
Arming tone
off
Switch
Arm automatically
on or off
: In addition to
: Auto-
62).
,
,
Alarm
on or
on or
TYRE PRESSURE CONTROL
(RDC)
with riding modes Pro
with tyre pressure control
(RDC)
OE
Switching target-pressure
warning on or off
The system can be set to is-
sue a target-pressure warning
if tyre pressure drops to the
defined minimum.
Navigate to
Vehicle settings
Switch
Target pressure
on or off.
warn.

HEATED GRIPS

with heated grips
Operating heated handlebar
grips
The heating in the heated
handlebar grips can be
activated only when the engine
is running.
The increase in power
consumption caused by
having the heated handlebar
grips switched on can drain the
battery if you are riding at low
engine speeds. If the charge
level is low, the heated handle-
bar grips are switched off to
ensure the battery's starting
capability.
OE
,
Settings
,
RDC
OE
91
.

Advertisement

Table of Contents
loading

Table of Contents