Front And Rear Seats - BMW Motorrad R 1250 R Rider's Manual

92 OPERATION
Start the engine (
Repeatedly press button 1 un-
til desired heating stage 2 ap-
pears in front of heated grip
symbol 3.
The handlebar grips have two-
stage heating.
medium heating power
high heating power
Stage 2 is for heating the
grips quickly: it is advisable
to switch back to stage 1 as
soon as the grips are warm.
The selected heating stage
will be saved if you allow
a certain length of time to
pass without making further
changes.
To switch off the heated
grips, repeatedly press
button 1 until heated grip
symbol 3 disappears.
135).

FRONT AND REAR SEATS

Removing passenger seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Press down on the front part
of passenger seat 2 and
at the same time turn seat
lock 1 to the left with the
ignition key and hold it in this
position.
Slightly raise passenger seat 2
at the front and release the
ignition key.
Remove rear seat 2 and place
it, upholstered side down, on
a clean surface.