BMW Motorrad R 1250 R Rider's Manual page 80

74 OPERATION
If the high-beam headlight
is switched on while the
daytime riding light is on, the
daytime riding light is switched
off after approx. 2 seconds and
the high-beam headlight, low-
beam headlight and front side
light are switched on.
If the high beam headlight is
switched off again, the daytime
running light is not automat-
ically reactivated, but must be
switched on again if required.
Automatic daytime riding light
The changeover between
daytime riding light and
low-beam headlight includ-
ing front side lights can be ef-
fected automatically.
WARNING
The automatic daytime rid-
ing light is not a substitute
for the rider's personal
judgement of the light
conditions
Risk of accident
Switch off the automatic
daytime riding light in poor
light conditions.
In the
Settings
,
settings
switch on the
time light
,
Vehicle
menu,
Lights
Auto. day-
function.
The indicator light for the
automatic daytime riding
light lights up.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is
automatically switched on
(e. B. in a tunnel). When suf-
ficient ambient brightness is
detected, the daytime riding
light is switched back on.
The indicator light for the
daytime riding light shows
if the daytime riding light is
active.
Manual operation of the light
when the automatic system is
switched on
If you press the button for
the daytime riding light, the
automatic daytime riding light
is switched off and the low-
beam headlight and front side
lights are switched on (e.g.
when you ride into a tunnel
and the response of the auto-
matic daytime riding light to
the change in ambient bright-
ness is delayed). The auxiliary
headlight switches on again
when the daytime riding light
is switched off.
Pressing the daytime riding
light button again reactiv-
ates the automatic daytime