BMW Motorrad R 1250 R Rider's Manual page 107

Call up the last menu used
In Pure Ride view: press and
hold the MENU rocker button.
The last menu used is called
up. The last entry highlighted
is selected.
Change of operating focus
with preparation for naviga-
tion system OE
If the Navigator is connected, it
is possible to switch between
operation of the Navigator and
the TFT display.
Changing operating focus
with preparation for naviga-
tion system OE
with navigation system
Secure the navigation system
( 217).
Display Pure Ride view
( 99).
Long-press the top section of
the MENU rocker button.
Operating focus switches
to the Navigator or the TFT
display, as applicable. The
active device is highlighted
on the left in the top status
line. Operator actions affect
the currently active device
until the operating focus is
changed again.
Operating navigation system
( 218)
System status displays
The system status is displayed
in the lower area of the menu if
a function is switched on or off.
Examples of what the system
statuses mean:
System status 1: ASC/DTC
function is switched on.
OA
Changing display for status
line
Requirement
The vehicle is at a standstill.
The Pure Ride view is dis-
played.
Switch on the ignition (
The TFT display shows all
the information necessary
for riding on public roads
from the on-board computer
(e.g.
computer (e.g.
information can be displayed
in the top status line.
1) and the trip
TRIP
TRIP
101
62).
2). The