BMW Motorrad R 1250 R Rider's Manual page 59

ABS Pro failed
with riding modes Pro
lights up.
ABS Pro failure! On-
ward journey pos-
sible. Ride carefully
to next specialist work-
shop.
Possible cause:
Monitoring of the ABS Pro
function has detected a fault.
The ABS Pro function is not
available. The ABS function is
still available. ABS provides
support only for braking in
straight-ahead driving.
You can continue to ride.
Bear in mind the more
detailed information on
certain situations that can
lead to an ABS Pro fault
message (
Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorised BMW Motorrad re-
tailer.
ASC/DTC intervention
quick-flashes.
The ASC/DTC has detected a
degree of instability at the rear
wheel and has intervened to
reduce torque. The indicator
OE
156).
and warning light flashes for
longer than ASC/DTC interven-
tion lasts. This affords the rider
visual feedback on control in-
tervention even after the critical
situation has been dealt with.
ASC/DTC self-diagnosis not
completed
slow-flashes.
Possible cause:
ASC/DTC self-diagnosis
not completed
The ASC/DTC function is
not available, because self-
diagnosis did not complete.
(The motorcycle has to reach
a defined minimum speed
with the engine running for
the wheel-speed sensors to
be checked: min 5 km/h)
Pull away slowly. The ASC/
DTC indicator and warning
light must go out after a few
metres.
If the ASC/DTC indicator and
warning light continues flash-
ing:
Seek the advice of a special-
ist workshop, preferably an
authorised BMW Motorrad
dealer.
53