Tyre Pressure Control (Rdc); Heating - BMW Motorrad R 1250 GS 2002 Rider's Manual

Table of Contents

Advertisement

90
OPERATION
TYRE PRESSURE CONTROL
(RDC)
with riding modes Pro
with tyre pressure control
(RDC)
OE
Switching specified-pressure
warning on or off
The system can be set to
issue a specified-pressure
warning if tyre pressure drops
to the defined minimum.
Navigate to
Vehicle settings
Switch
Target pressure
on or off.
warn.

HEATING

Operating heated handlebar
grips
with heated grips
without seat heating
The heating in the heated
handlebar grips can be
activated only when the engine
is running.
The increase in power
consumption caused by
having the heated handlebar
grips switched on can drain the
battery if you are riding at low
engine speeds. If the charge
level is low, the heated handle-
bar grips are switched off to
ensure the battery's starting
capability.
OE
,
Settings
,
RDC
OE
OE
Start the engine (
Repeatedly press button 1 un-
til the desired heating level 2
appears in front of the heated
.
grip symbol 3.
The handlebar grips have two-
stage heating.
Low heating power
High heating power
The high stage is for heating
the grips quickly: it is advis-
able to switch back to stage
1 as soon as the grips are
warm.
The selected heating stage
will be saved if you allow
a certain length of time to
pass without making further
changes.
To switch off the heated
grips, repeatedly press
button 1 until the heated
grip 3 is hidden.
136).

Advertisement

Table of Contents
loading

Table of Contents