Table of Contents
Advertisement
The following settings are avail-
able:
: Damping for comfort-
Road
able on-road riding
: Damping for
Dynamic
dynamic on-road riding
Adjusting spring preload
To adjust spring preload:
Start the engine (
Repeatedly long-press but-
ton 1 until the setting you
want to use is displayed.
The spring setting cannot
be changed while riding.
The following message is
displayed if no setting is
possible:
Load adjustment
only avail. stopped.
Selection arrow 4 is displayed.
The selection arrow 4 dis-
appears after the status is
changed.
The following settings are avail-
able:
Min
ting (only suitable for one-up
135).
mode)
Auto
ting (recommended chassis
and suspension setting)
Max
ting (only suitable for two-up
mode)
The settings for damping and
spring preload shown on the
display are automatically ac-
cepted if you allow a certain
length of time to pass without
pressing button 1.
: Minimum spring set-
: Automatic spring set-
: Maximum spring set-
79
Advertisement
Chapters
Table of Contents
