BMW Motorrad R 1250 R Rider's Manual page 54

48 STATUS INDICATORS
The 'General' warning
light flashes red if the
tyre pressure registered by the
sensor is outside the permiss-
ible tolerance range.
For further information about
BMW Motorrad RDC see the
section entitled "Engineering
details" from page (
onward.
Tyre pressure in limit range of
the permitted tolerance
with tyre pressure control
(RDC) OE
lights up yellow.
is displayed in yellow.
Tyre pressure does
not match setpoint
Check tyre pressure.
Possible cause:
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct tyre pressure.
Before adjusting the tyre
pressure, observe the
information on temperature
compensation and pressure
adaptation in the section
entitled "Engineering details":
Temperature compensation
( 165)
Pressure adaptation (
Find the correct tyre pres-
sures in the following places:
On the back cover of the
rider's manual
Display in the
SURE
Sign under the seat
Tyre pressure outside the
164)
permitted tolerance
with tyre pressure control
(RDC)
Stop immediately! Check
tyre pressure.
Stop immediately! Check
tyre pressure.
Tyre pressure outside the
permitted tolerance.
Risk of accident, degradation
of the vehicle's driving char-
acteristics.
Adapt your style of riding
accordingly.
TYRE PRES-
view
OE
flashes red.
is displayed in red.
Tyre pressure does
not match setpoint
Tyre press. control.
Loss of pressure.
WARNING
165)