Table of Contents
Advertisement
88
OPERATION
If Hill Start Control Pro
has been deactivated by
means of the handbrake lever,
automatic Hill Start Control is
deactivated for the next 4 m.
disappears.
Alternatively, ride off in 1st or
2nd gear.
In order for the motor-
cycle to pull away from
rest with Hill Start Control
Pro, the throttle grip has to be
turned to open the throttle for
pullaway.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control Pro is deac-
tivated.
See the section entitled "En-
gineering details" for more
information on Hill Start Con-
trol Pro:
Hill Start Control function
(
167)
SHIFT LIGHT
with riding modes Pro
Switching shift light on and
off
Call up the
Settings
Vehicle settings
Switch
Shift light
off.
Setting shift light
Switch on the
function.
Navigate to
Vehicle settings
Configuration
Shift light
The following settings are
available:
Start RPM
End RPM
Brightness
Frequency
quency of 0 Hz corresponds
to steady light.
Changes to brightness and
flashing frequency are demon-
strated by the shift light light-
ing up or flashing.
ANTI-THEFT ALARM (DWA)
with anti-theft alarm (DWA)
Activation
Switch on the ignition (
Customising anti-theft alarm
settings (
Switch off the ignition.
If the alarm system is activ-
ated, then the alarm system
will be automatically activated
OE
when the ignition is switched
off.
Activation takes approximately
,
30 seconds to complete.
menu.
Turn indicators flash twice.
on or
Shift light
,
Settings
,
(under
).
. A flashing fre-
91).
OE
62).
Advertisement
Chapters
Table of Contents
