Silencer - BMW Motorrad R 1250 R Rider's Manual

190 MAINTENANCE
Install wheel bolts 1 and
tighten to specified torque.
Rear wheel to wheel
flange
Tightening sequence: tighten
in diagonally opposite se-
quence
M10 x 1.25 x 40
60 Nm
Install the silencer (

SILENCER

Removing silencer
CAUTION
Hot exhaust system
Risk of burn injury
Do not touch a hot exhaust
system.
Allow rear silencer to cool
down.
Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxiliary
stand; BMW Motorrad recom-
mends the BMW Motorrad
rear-wheel stand.
Install the rear-wheel stand
(
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Remove the bolt 1 from the
cover 2.
191).
Slacken nut 3 in clamp 4.
Remove screw 2 and
washer 3.
Remove silencer 1.
174).
OE