Table of Contents
Advertisement
188
MAINTENANCE
Tighten axle clamping
screws 1 to the specified
torque.
Clamping screws in axle
holder
Tightening sequence: Tighten
screws six times in alternate
sequence
M8 x 35
19 Nm
Remove the front-wheel
stand.
Position left and right brake
calipers on the brake discs.
Install securing screws 4 on
left and right and tighten to
specified tightening torque.
Brake caliper on the
telescopic forks
M10 x 65
38 Nm
Remove the adhesive tape
from the wheel rim
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to
delayed braking effect.
Before driving, check that
the brakes respond without
delay.
Operate the brake several
times until the brake pads are
bedded.
Advertisement
Chapters
Table of Contents
