Lighting - BMW Motorrad R 1250 R Rider's Manual

Air filter cover to intake
air silencer
Tightening sequence: in diag-
onally opposite sequence
M5 x 50
3 Nm
Place centre trim panel in po-
sition, paying attention to the
connections to the side pan-
els.
Install screws 1.
Install screws 1.
Install screws 1.
Install the rider's seat (

LIGHTING

Replacing bulbs for front and
rear turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
193
93).