Removing And Replacing The Cover - HP Kayak XA 05xx Installation Manual

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Minitower PC Workstation
WARNING

Removing and Replacing the Cover

For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.
Removing the Cover
1 Switch off the display and computer.
2 Disconnect all power cables and any LAN or telecommunications
cables.
3 If necessary, unlock the cover using the key on the back panel.
4 Lift the two latches on the front sides of the computer upwards.
5 Grasp the cover on the sides at the back of the computer and slide
it forwards and off the computer.
Removing and Replacing the Cover
English
3