9-2
Drives
Figure 9-1. Identifying drive configurations
Removing a Blank Drive Bezel
To remove a blank drive bezel, follow these steps:
1.
Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2.
Remove the workstation cover and front bezel.
3.
See the following illustration to remove a blank drive bezel.
Figure 9-2. Removing a drive bezel
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
1
2
1
File Name: J-CH09.DOC Last Saved On: 12/14/98 1:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
3
4
5
2