7-6
Hardware Upgrade Preparations
Removing the Front Bezel
To remove the front bezel, follow these steps:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the workstation cover.
3. See the following illustrations to remove the front bezel.
Figure 7-3. Locating the front bezel release latches
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: H-CH07.DOC Last Saved On: 12/10/98 11:33 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED