Using The Scsi Cable - Compaq Deskpro AP400 Reference Manual

9-12 Drives

Using the SCSI Cable

The following SCSI cable is included with your workstation (available on select
models):
Figure 9-12. SCSI cable
NOTE: The SCSI cable included with your workstation may look slightly
different than the one pictured.
The SCSI cable illustrated above supports up to 4 SCSI devices and comes with
a terminator
NOTE: If you are installing a narrow SCSI device, you will need to attach a
68- to 50-pin SCSI adapter to the narrow SCSI device.
For additional information about installing optional SCSI devices, refer to the
documentation included with the device or contact your Compaq authorized
dealer, reseller, or service provider.
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
1
on the end.
File Name: J-CH09.DOC Last Saved On: 12/14/98 1:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED