9-4
Drives
Installing a 1.6-inch Hard Drive in Bay 5
The 1.6-inch hard drive should be installed in bay 5. Bay 5 is an internal bay
(bracket) located to the right of the drive cage.
NOTE: If you purchase an optional hard drive bracket, you can install the
1.0-inch hard drive in bay 4.
To install a 1.6-inch hard drive, follow these steps:
1.
Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2.
Remove the workstation cover.
3.
See the following illustrations to install a 1.6-inch hard drive in bay 5.
Figure 9-4. Removing the hard drive bracket (bay 5)
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
2
1
File Name: J-CH09.DOC Last Saved On: 12/14/98 1:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED