Expansion Boards; Installing An Expansion Board - Compaq Deskpro AP400 Reference Manual

Chapter 10

Expansion Boards

This chapter provides instructions for installing and removing PCI or ISA
expansion boards, and an Accelerated Graphics Port (AGP) graphics controller.
NOTE: The following instructions also apply to installing and removing
graphics boards. For information about the graphics controller installed on your
workstation, refer to the appropriate guide on the SmartStart for Workstations
CD under X:\DOCS\GRAPHICS, where X is your CD-ROM drive designation.
For information on preparing the workstation for upgrades, see Chapter 7.

Installing an Expansion Board

Your workstation contains six expansion slots, five of which are available at
any one time. The following figure identifies the physical locations of slots
1-6. See the corresponding table for component names.
3
4
Figure 10-1. Identifying the expansion slots
Writer: Clifton Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: K-CH10.DOC Last Saved On: 12/14/98 1:37 PM
1
2
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
5
6
Compaq Professional Workstation AP400 Reference Guide
10-1