Installing A Scsi Device - Compaq Deskpro AP400 Reference Manual

Installing a SCSI Device

Before you install a SCSI device:
Verify the SCSI ID of the drive and, if necessary, set the SCSI ID to a
unique number. See the section "Important Guidelines for Installing
Optional SCSI Devices" earlier in this chapter or refer to the
documentation included with the device.
Determine if the device ought to have termination enabled or disabled.
Set the termination if necessary. See the section "Using the SCSI Cable"
earlier in this chapter or refer to the documentation included with the
device.
To install a SCSI device, please follow the procedures for "Installing an
Optional Diskette, CD-ROM, or Tape Drive" earlier in this chapter.
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
File Name: J-CH09.DOC Last Saved On: 12/14/98 1:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Professional Workstation AP400 Reference Guide
9-13