Checking The Status Of Send Jobs (Imageclass Mf7480 Only); Checking Send Job Details - Canon imageCLASS MF7470 Basic Operation Manual

Checking the Status of Send Jobs (imageCLASS MF7480 Only)

This section describes how to check/change the status of send jobs.
– If Job Log Display in System Settings is set to [Off], [TX Job Log] is not displayed on the System Monitor screen.
– Send jobs to e‑mail, I‑fax, and file servers can be checked.
– The maximum numbers of jobs that are displayed are:
– Job status screen: 70 jobs
– Job log screen: 128 jobs
– When the maximum number of jobs that can be displayed is reached, the oldest job is deleted each time a
new job is added.

Checking Send Job Details

●
You can check the detailed information of any send job, such as the destination and the
date and time the job was specified.
1
2
3
4
②
① Select the job whose detailed information
you want to check.
② Press [Details].
– If the job that you want to select is not
displayed, press [▼] or [▲] to scroll to the
desired job.
– You can cancel TX jobs which are being
sent or waiting to be sent by pressing
[Cancel] in [TX Job Status]. For more
information, see "Using the System Monitor
Screen," on p. 4‑91.
5
Check the details of the selected
job.
6
Press [Done] repeatedly until
the Send Basic Features screen
appears.
①
4‑97