Sending An I-Fax (Imageclass Mf7480 Only) - Canon imageCLASS MF7470 Basic Operation Manual

Sending an I-Fax (imageCLASS MF7480 Only)

You can scan an original, and send it to a destination via the Internet as an I‑fax. An I‑fax
can only be sent to machines that can receive faxes through the Internet. You can add the
document's name, a subject line, message body text, and reply‑to address.
The following conditions are always selected:
– Paper Size: LTR
This is because the sender does not know whether the recipient's machine can receive sizes other than LTR.
Originals larger than LTR are reduced to LTR size.
– File Format: TIFF
– Resolution: B&W 200 x 100 dpi or B&W 200 x 200 dpi
1
Press (SEND).
2
Place your originals.
3
① ①
① Specify the I‑fax address.
② Press [Send Settings].
For instructions on specifying destinations,
see "Specifying Destinations," on p. 4‑32.
4‑8
② ②
4
5
① Enter the name of the document (up to 24
characters) that you want to send.
② Press [OK].
– You can also use
enter numbers, and
entry.
① ①
② ②
– (numeric keys) to
(Clear) to clear your