Canon imageCLASS MF7470 Basic Operation Manual page 321

Error Code
#0752 –
(for the
imageCLASS
MF7480 only)
–
–
#0753
A TCP/IP error occurred while sending
(for the
an e‑mail message. (Socket, Select
imageCLASS
error, etc.)
MF7480 only)
#0755 –
(for the
imageCLASS
MF7480 only)
–
–
#0801
–
(for the
imageCLASS
MF7480 only)
–
11‑24
Description
The SMTP server name or POP
server name for e‑mail or I‑fax is
not correct, or the server is not
functioning.
The domain name or e‑mail
address may not be set.
The network is down.
You cannot send jobs because
TCP/IP is not functioning correctly.
The IP address is not set.
When the machine was turned on,
an IP address was not assigned to
the machine by the DHCP, RARP, or
BOOTP server.
A timeout error occurred while the
machine was communicating with
the SMTP server to send an e‑mail
message.
The SMTP server returned an
error while trying to connect. The
destination is not correct. An error
occurred on the server side during
transmission to a file server.
Action
– Check the SMTP server name,
domain name, POP server name,
and e‑mail address in E‑mail/I‑Fax
in Network Settings in System
Settings (from the Additional
Functions screen).
– Check that the SMTP server is
operating properly.
– Check the network status.
Check the network cables and
connectors. If the machine still does
not operate normally, turn the main
power off, and then back on.
– Check TCP/IP Settings in Network
Settings in System Settings (from
the Additional Functions screen).
– Check TCP/IP Settings in Network
Settings in System Settings (from
the Additional Functions screen).
– Check TCP/IP Settings in Network
Settings in System Settings (from
the Additional Functions screen).
Or wait a while, and then try
sending again.
– Check that the SMTP server is
functioning normally, or check the
network status.
– Check that the SMTP server is
functioning normally. Check
the network status. Check the
destination setting. Check the
status and setting of the file server.