Canon imageCLASS MF7470 Basic Operation Manual page 315

Message
Check the cable.
(imageCLASS MF7480/
MF7470 Only)
Check the TCP/IP.
(imageCLASS MF7480/
MF7470 Only)
Check your document.
Load Paper.
11‑18
Description
The machine and cable are not
connected properly.
The machine's TCP/IP is not
operating.
Paper or originals are jammed.
– The machine has run out of
paper. No more prints can
be made.
– The paper drawer is not
inserted correctly.
Action
Turn off the machine, check
that the machine is connected
to the network using the
proper cable, and then turn the
machine on.
Check the IP Address Settings
in Network Settings in System
Settings (from the Additional
Functions screen). (See
Chapter 6, "Network
(imageCLASS MF7480/MF7470
Only)," in the Reference
Guide or "Set the Machine for
Network Usage (imageCLASS
MF7480/MF7470 Only)," in the
Starter Guide.)
Remove any jammed paper or
originals. (See "Clearing Jams,"
on p. 11‑2, and "Feeder," on
p. 11‑5.)
– Load paper. (See "Set Up
the Machine," in the Starter
Guide.)
– Insert the paper drawer
properly. (See "Set Up the
Machine," in the Starter
Guide.)