Canon imageCLASS MF7470 Basic Operation Manual page 320

Error Code
#0059 Your transmission is canceled
because the number you dialed was
different from the number registered
on the other party's fax machine.
#0701
The specified Department ID does not
exist, or the password has changed.
#0703
The memory for image data is full
(for the
when sending color documents.
imageCLASS
MF7480 only)
#0705
The send operation was interrupted
(for the
because the size of the image
imageCLASS
data is larger than that specified in
MF7480 only)
Maximum TX Data Size set in E‑mail/
I‑Fax Settings in Communications
Settings in System Settings (from the
Additional Functions screen).
#0749 You could not execute the job
because a service call message is
being displayed.
# 0751
The server is not functioning. The
(for the
network is down (the server is unable
imageCLASS
to connect to the network or was
MF7480 only)
disconnected).
Description Action
Check to see that the correct fax
number is registered on the other
party's fax machine.
Enter the correct Department ID or
password using – (numeric keys),
and try again. (See "Department/User
ID Management," on p. 1‑17.)
– Wait a few moments, and then try
sending again after other send jobs
are complete.
– Erase documents stored in
memory. If the machine still does
not operate normally, turn the
main power off, and then back on.
– Change the setting for the
Maximum TX Data Size in E‑mail/
I‑Fax Settings in Communications
Settings in System Settings (from
the Additional Functions screen).
– Select a lower resolution.
– If you are using I‑fax, decrease
the number of pages containing
images that you are sending each
time, so that you do not exceed the
Maximum TX Data Size.
– Set Divide into Pages to [On] in the
File Format screen.
Turn the main power off, wait for 10
seconds, and turn the main power
back on. If the machine still does not
work normally, turn the main power
off, disconnect the machine, and
contact Canon Authorized Service
Facilities or the Canon Customer Care
Center.
– Check the recipient's address.
– Check that the network is up.
11‑23