Canon imageCLASS MF7470 Basic Operation Manual page 87

5
① ①
① Select the paper source in which you want
to register the paper type.
The numbers on the screen represent the
following paper sources:
6
① ①
① Select the desired paper type loaded in
the paper source.
② Press [OK].
Make sure that the registered paper type
setting is the same paper type that is
loaded in the paper source.
2‑20
Paper Drawer 1
Paper Drawer 2
② ②
7
Press [Done] repeatedly until the
Basic Features screen appears.
The registered paper type information is
displayed through the use of icons on the
paper select screen, as shown below.