Manual Sending - Canon imageCLASS MF7470 Basic Operation Manual

Manual Sending

Use manual sending when you want to talk to the recipient before sending a
fax document, or if the recipient does not have a fax machine that can receive
automatically.
– Manual Sending enables you to send a document consisting of two or more pages only if you use the feeder
to send it. You can only send one page at a time when you place your originals on the platen glass.
– If you cancel Manual Sending during transmission, the pages that have already been scanned are sent. You
can check how many pages have been sent to the destination by printing an Activity Report. (See "Printing
the Fax Job Log (Activity Report)," on p. 4‑96.)
– You cannot use group dialing for manual sending.
1
Press (SEND).
2
Place your originals.
3
① Press [New Address].
② Press [Fax].
4
You should hear the dial tone.
4‑52
5
– For instructions on specifying the scan
settings, see "Scan Settings," on p. 4‑16.
– For instructions on setting the Stamp
mode, see Chapter 4, "Sending and
Receiving," in the Reference Guide.