Canon imageCLASS MF7470 Basic Operation Manual page 105

2
① Press [X] to specify the horizontal axis
of the paper, then enter a value.
② Press [Y] to specify the vertical axis of
the paper, then enter a value.
③ Press [OK].
– If you make a mistake when entering
values, press [C] on the touch panel
display, then enter the correct values.
– To enter values in millimeters, press
[mm].
– If you enter values outside the setting
range, [OK] is grayed out and cannot be
selected. Enter an appropriate value.
– You can adjust values for [X] between 5
7/8" and 17", and for [Y] between 3 3/4"
and 11 11/16".
3
3‑8
4
② ②
① Select the desired paper type.
② Press [OK].
– When printing on special types of paper,
such as heavy paper, be sure to correctly
set the paper type, especially if you are
using heavy paper. If the type of paper
is not set correctly, it could adversely
affect the quality of the image.
Moreover, the fixing unit may become
dirty and require a service repair, or the
paper could jam.
– If you select [Irreg. Size] for copying, you
cannot use the Rotate Collate, Rotate
Group, 1 ▶ 2‑Sided, 2 ▶ 2‑Sided, Book
▶ 2‑Sided, 2‑Page Separation, Image
Combination mode.
If you want to select an envelope
●
size:
1
① ①