Canon imageCLASS MF7470 Basic Operation Manual page 367

System Settings
SMTP Authentication
(SMTP AUTH)
Off
On
SMTP Server
E‑mail Address
POP Server
POP Address
POP Password
POP Interval
Startup Time Settings
Communications Settings
E‑mail/I‑Fax Settings*
Maximum TX Data Size
Divided TX over Max.Data
Size
Default Subject
* 1 Indicates the item that appear only for the imageCLASS MF7480.
12‑38
Sets whether to use the SMTP server requires SMTP
Authentication (method for authenticating users who have
logged in the POP server before sending e‑mail).
Disables SMTP Authentication.
Enables SMTP Authentication.
– User
– Password
Registers the SMTP server name.
Enters the e‑mail address your machine will use (max. 64
characters).
Enters the POP server IP address or name (max. 48
characters).
Enters the login name for access to the POP server (max. 32
characters).
Enters the password for access to the POP server (max. 32
characters).
Sets the interval you want the POP server to check for
incoming e‑mail. If the interval is set to 0, the POP server is
not checked automatically. (1‑99)
Sets the time period required to delay the startup of network
communications for the machine (0‑300sec).
Sets the fax and e‑mail/I‑fax communication.
Sets the e‑mail/I‑fax communications.
1
Sets the maximum data size for outgoing e‑mail messages
and I‑fax documents. If the e‑mail message send job exceeds
this data size limit, it is split up into several e‑mail messages
before being sent. However, if an I‑fax transmission exceeds
the data size limit, it is handled as an error, and it is not sent.
(0MB‑99MB)
Sets whether to divide a document into separate files when it
is sent if its size exceeds the data size you specify.
– Off
– On
The subject that you enter here is used as the default subject
whenever you do not enter a subject when sending a job.