Users In Canada; Preinstallation Requirements For Canon Facsimile Equipment - Canon imageCLASS MF7470 Basic Operation Manual

Users in Canada

Preinstallation Requirements for Canon Facsimile Equipment

A. Location
Supply a suitable table, cabinet, or desk for the machine. See p. 13‑2 for specific dimensions
and weight.
B. Order Information
1. A single telephone line (touch‑tone or rotary) should be used.
2. Order a CA11A modular jack which should be installed by the telephone company. If the
CA11A jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company's business representative. The
line should be a regular voice grade line or an equivalent one. Use one line per unit.
DDD (Direct Distance Dial) line
‑or‑
IDDD (International Direct Distance Dial) line if you communicate overseas
Canon recommends an individual line following industry standards, i.e., 2,500 (touch‑tone) or 500
(rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit without
"Call Waiting" can be used with your facsimile unit. Key telephone systems are not recommended because
they send nonstandard signals to individual telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The power outlet should be a three‑prong grounded receptacle (Single or Duplex). It should
be independent from copiers, heaters, air conditioners, or any electric equipment that is
thermostatically controlled. The rated value is 115 volts and 15 amperes. The CA11A modular
jack should be relatively close to the power outlet to facilitate installation.
xxxvi