Canon imageCLASS MF7470 Basic Operation Manual page 148

10
① Select a file format for sending your
document.
② If you want to separate multiple images
and send them as separate files, each of
which consists of only one page, press
[Divide into Pages].
If you want to send multiple images as a
single file without dividing them, do not
press [Divide into Pages].
③ Press [Done].
For instructions on setting the file format,
see "Setting the File Format (imageCLASS
MF7480 Only)," on p. 4‑14.
11
Press (Start).
If the original is placed on the platen glass,
follow the instructions that appear on the
touch panel display, then press
for each original. When scanning is complete,
press [Done].
Scanning starts.
The scanned data is sent to the specified
destination when scanning is complete.
(Start) once
4‑13