Registering/Editing File Server Addresses
●
1
Press
(Additional Functions).
2
If a password has been set for the
Address Book, enter the password using
–
(numeric keys), then press [OK] to
enter the Address Book Settings menu. (See
Chapter 8, "System Settings, " in the Reference
Guide.)
3
4
①
②
① Select a one‑touch button to store or
change.
② Press [Register/Edit].
–
If the desired one‑touch button is not
displayed, press [▼] or [▲] to scroll to the
desired one‑touch button.
–
You can also specify the one‑touch
button's number by entering the three
digit number of the desired one‑touch
button using
–
One‑touch buttons that already have
destinations stored in them are displayed
with a black square (■) in the lower right
corner of the key.
–
If you select a one‑touch button that
already has destinations stored in it, the
destinations are displayed.
–
If you register multiple destinations as a
group address in a one‑touch button, the
number of destinations registered in the
group address is displayed.
5
If you select a one‑touch button already
storing a destination, skip this step.
6
① Press the Protocol drop‑down list.
–
(numeric keys).
4‑79