Paper Selection
You can manually specify a paper size or set the machine to automatically select the
paper size for you.
–
If you are copying an original with an image that extends all the way to the edges onto the same size paper
at a copy ratio of 100%, the periphery of the original image may be cut off slightly on the copy. For more
information on how much may be cut off, see "Scanning Area," on p. 2‑4.
–
If you select [Envelope], [Transparency], or [Labels], make sure that you do not specify any Finishing modes
(Collate or Group).
–
If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is set to [On],
and the paper size/type have been stored, the selected paper size/type are displayed on the screen. (See
"Stack Bypass Standard Settings," on p. 12‑8.)
Automatic Paper Selection
The machine automatically selects the copy paper size.
–
The Automatic Paper Selection mode is available only if the originals are fed from the feeder.
–
The Automatic Paper Selection mode cannot be used with the Auto Zoom or Image Combination mode.
–
You cannot use the Automatic Paper Selection mode when copying the following types of originals. Copy
these originals using the Manual Paper Selection mode.
–
Nonstandard size originals
–
Highly transparent originals, such as transparencies
–
Originals with an extremely dark background
–
STMT or STMTR originals that are placed on the platen glass
–
If Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) is set to [Off]
for a particular paper source, you cannot make copies on paper loaded in that paper source in the Automatic
Paper Selection mode. (See "Drawer Eligibility For APS/ADS," p. 12‑7.)
3‑4