6
① Select [A4], [A4R], [B5], [B5R], [LTR], or
[LTRR].
② Press [OK].
–
[Rotate] can be selected only in the
following cases:
–
If the available paper size is selected
manually
–
If the available paper size is loaded
in both the horizontal and vertical
directions
–
The selected paper source must have
Drawer Eligibility For APS/ADS in
Common Settings (from the Additional
Functions screen) set to [On]. (See
"Drawer Eligibility For APS/ADS," on
p. 12‑7.)
–
When you have selected Automatic Paper
Selection for the Rotate mode, make sure
to select a paper size which can be rotated.
Otherwise, output will not be rotated.
–
If there is no paper which can be rotated,
output will be collated.
Same Page (Group)
1
Press
(COPY).
2
Place your originals.
7
Press
(Start).
If the original is placed on the platen glass,
follow the instructions that appear on the
touch panel display. Press
each original. When scanning is complete,
press [Done].
–
To cancel this setting, press [Finishing],
then press [Cancel].
–
To cancel all settings and return the
machine to the Standard mode, press
(Reset).
3
(Start) once for
3‑23